Glass & Mirrors Cut to Size
Please Contact us for a quotation on 0208 888 9000 / 9111
All types of glass and mirror can be cut to your size and specification whether its a piece of picture frame glass or a fridge shelf. If required we will remove the sharp edges and if a fine finish is needed we can machine polish or bevel them for you.
Glass thicknesses from 3mm to 25mm are readily available and most can be toughened to increase the mechanical strength if required.
Please call us if you need advise on selecting the glass type or thickness.
Splashbacks & WorkshopsPlease Contact us for a quotation on 0208 888 9000 / 9111
We can manufacture worktops in 25mm float glass or 19mm toughened float glass. Splash backs are usually supplied in 6mm toughened glass but thicker glass is available if you require it.
Cut outs for sinks, taps or electrical outlets can be made using water jet cutting technology to achieve sooth edges.
If the work top or splash back is to be coloured, we use Low Iron glass, which is optically clear and looses the natural greenness of glass for accurate colour matching.
Polishing, Bevelling & DrillingPlease Contact us for a quotation on 0208 888 9000 / 9111
Various mechanical processes can be performed on glass to give different effects and finishes.
Bevelling the edges of mirrors or the Georgian squares of window pane, can enhance them dramatically. Glass edges can be highly polished on shower screens or shelving which adds safety and a clean visual finish.
if you need mounting or access holes, these can be drilled to your sizes.
Security & Safety GlassPlease Contact us for a quotation on 0208 888 9000 / 9111
In certain situations special glass is required. Higher levels of security can be achieved with laminated glass which breaks but stays in one piece. The glass is made by having two pieces of glass bonded together with a resin.
One side can break while the other is intact. The glass and internal resin can be made thicker to reach an anti bandit level of protection. Laminated glass is also a safety glass.
Toughening glass increases its mechanical strength by 3-4 times and is useful in certain situations. It shatters into small pieces when it breaks and is a safety glass.
Structual Glass & BalustradesPlease Contact us for a quotation on 0208 888 9000 / 9111
We can supply and fit or supply to your drawings or templates glass stair treads and balustrades.
A wide selection of brackets and fixtures are available in stainless steel, chrome, brass or coloured finishes. We can help you select the type you need for your project and the type of glass to meet any building regulations for a given situation.
Please call in to our shop or telephone for an on site survey for a free quotation.
Double Glazed UnitsPlease Contact us for a quotation on 0208 888 9000 / 9111
Replacement double glazed units can be manufactured in just 2 hours if you require an emergency service.
We can offer Low E glass ( soft or hard coat ), warm edge spacer bars, Argon or Krypton gas filling and a variety of spacer bar sizes from 4mm to 20mm.
White internal Georgian bars, lead work and coloured film can be added to your unit if desired.
Units can be made with various thicknesses and types of glass. Please ask our staff.
We have mobile glaziers based over all the North London postcodes for re-glazes, measure ups and repairs. All glass/mirror cutting and processing is handled at our workshop in Lordship Lane, Wood Green, N22 5BY.